F25s - Talsa Hydraulic Sausage Stuffer / Filler - 48lb. Capacity

F25s - Talsa Hydraulic Sausage Stuffer / Filler - 48lb. Capacity

Stainless Steel:

• LID
• Piston
• Barrel Bottom
• Hydraulic Ram
• Swivel Casters (Optional)
  

Motor Specs:

• 1.75HP 
• 110 Volt
• 18 Amps

Optional Motors:

• 1.5HP
• 220 Volt
• 3 Phase

&

• 1.75HP
• 220 Volt
• Single Phase

Dimensions:

• 23" x 21" x 46"
• 350lbs.

Information:

• High Hydraulic power to stuff the densest and most compact mixtures. Control and safety gauge. Speed control next to the operator.
• Automatic motor start and stop when pushing the knee lever: much lower consumption, less heat and noise and extended life of the oil and hydraulic components. Motor thermal protection. Waterproof electrical box.
• Immediate stop of the mixture output by automatic piston decompression.
• Robust design, solid frame made of laminated stainless steel.
• Rectified mixture barrel interior, perfectly round. In all stainless steel, even the bottom. Barrel with internal tube for discharge of air/water, simplified cleaning.
• Completely sealed between barrel and frame, independent, no filtrations. Watertight Construction.
• Lid and piston of thick laminated stainless tell, solid, very resistant.
• Lid easily removable, smooth opening and closing movements, removable bolts, with handles.
• Hygienic lid seal, solid piece, compact and resistant.
• Piston with Large FDA fodo grade silicone seal, can be easily cleaned from the top of the barrel. Piston effortlessly self-detachable with robust hexagonal stainless steel piston extracting wrench included. 
• Soft knee lever, reversible, two possible operation directions.
• Lock of the knee lever in the descent of the piston, it is not necessary to keep it pressed and automatically disconnects when reaches the bottom.
• Stainless Steel Ram on the Hydraulic Cylinder. Divided into four parts for better service.
• Horns of transparent food approved thermoplastic material: Better Tighten on the Lid and Display the Mixture at the exit. Standard with Diameters 14,20 and 30mm (.55",.79" & 1.18") - Plastic Tubes
• Optional Tubes in Stainless Steel:  (12mm,15mm,18mm,20mm,25mm,30mm,38mm,43mm)
• Internal oil reservoir with built-in level view max-min (does not need check). Easily removable.
• Standard with two wheels and two adjustable feet, anti-slip and self-adjusting and handle for displacement.

Options:

• Four wheels (two swivel casters with extended anti-tilt brake and the two standard fixed). 
• Special Diameters or Length of Stainless Steel Horns Available.
• Manual Portioner, (20 Grams to 500 Grams) - (1oz. to 17oz.)